Assembly and Construction of the Aquasport 52 Pool
Aquasport 52 Pool Wall
888 89 POOLS Call For Up To Date Prices Or Click Here
The wall of the Aquasport 52 Pool is assembled one panel at a time, each interlocking with the last. Each section is made of thick extruded aluminum, and measures 4″ x 52″. The columns or ribs you see on the wall are where each panel lock together. Each wall-section has two channels, a receiving slot, and a bead. By joining together these panel’s, sliding the beaded end of one section, into the receiver channel of another, together they form a super strong 1-inch vertical column every 4-inches.
Aluminum Pool Construction
It has been proven over the years, that no pool wall lasts longer than an aluminum pool wall. They do not rust! Aluminum becomes stronger as they get cold. It is also a fact that thick extruded aluminum interlocking panels make for the best swimming pool walls.
Framing of the Aquasport 52 All Aluminum Pool
The bottom track of this pool that the wall panels
sit on is 4 inches wide (aluminum), with a ninetydegree angle added for strength. Each length of the bottom track is bolted together using aluminum plates thicker than your pinky finger, and bolts fatter than your index finger.
Top Rails of the Aquasport 52 Pool
888 89 POOLS Call For Up To Date Prices Or Click Here
The Aquasport 52 has ridged extruded aluminum top-plates/rails. Compare that
to the resin/plastic pools of today. You have to make a thick piece of resin if
you’re ever going to compare it to the strength of our metal aluminum top-rails.
Metal that by the way, will be worth something in 30 to 40 years.
All above-ground pools or semi-inground pools rely on a cheap piece of plastic to
receive the vinyl liner bead. The Aquasport 52 top rails have a bead channel built
into the aluminum top plates. The bead channel for the pool liner gets formed
into the top-rail during the extrusion process. You will never have to take the pool
apart to replace the vinyl-pool-liner.
Bead Channel Of the Aquasport 52
888 89 POOLS Call For Up To Date Prices Or Click Here
The inside edge of the Aquasport 52 Pool top-rails are like the coping of an inground
pool. That’s why you can pour a cement deck, or install patio block over the toprails if you want.
The strength of the wall and bead-channel enables you to use a thicker vinyl
pool liner. There is no chance of the thicker liner-option buckling the wall or
ripping out of the bead socket like with traditional above-ground pools.
All the Aquasport 52 Oval Pools have buttresses and straps, to support the
long straight sides of the pool. See them in this partially built semi
inground oval installation. The swimming pool buttresses on the outside
work two ways on a semi-inground installation. They help to keep the wall
from leaning out. But like inground pool installations, once you backfill
over them and the soil compacts, they work like braces preventing the wall
from moving inwards too.
The thick, wide bottom track is unsurpassed in the swimming pool industry, Nothing Compares to an Aquasport 52 Pool
Semi-Inground | Above-Ground | In-ground – The Aquasport 52 Brochure
Brochure Page for the Aquasport 52 Pools made by Aqua
sports Pools LLC, or as the company is better known, Buster
Crabbe Pools. The Aquasport 52 Pool is my #1 top choice.
An above-ground pool, semi-inground pool, and quite often,
also used as an in-ground swimming pool. The strength of the
Aquasport 52 wall, makes it perfect for any application, or
landscape design.
aquasport pools 